GOST, TU, standards and specifications for oil products and chemical products, construction materials and polymer.

All papers published here are not official status.

GOST 10136-77. Diethylene glycol. Specifications.

This standard applies to diethylene glycol intended for use in industrial organic synthesis, as an extractant of aromatic hydrocarbons, for the dehydration of natural gas and other industries.

GOST 10227-86. Fuel for jet engines. Specifications.

This standard applies to jet fuel.

GOST 10585-99. Fuel oil. Mazut. Specifications.

This standard applies to oil, refined products derived from oil, condensate and raw materials intended for vehicles, stationary boilers and process installations.

GOST 11955-82. Road petroleum liquid bitumens. Specifications.

This standard applies to liquid petroleum bitumen road, used as a binder in the construction of pavements, grounds and for other purposes.

GOST 12308-89. Thermostable fuels T-6 and T-8B for jet engines. Specifications.

This standard applies to heat-stable jet fuel derived from petroleum and its derivatives.

GOST 14710-78. Petroleum toluene. Specifications.

This standard applies to petroleum toluene obtained in the process of catalytic reforming of gasoline fractions and pyrolysis of petroleum products and is designed for the needs of the economy as a raw material for organic synthesis, high-octane additives to motor fuels, solvents and for export.

GOST 16336-77. Polyethylene compositions for cable industry. Specifications.

This standard applies to composition on the basis of high-pressure polyethylene (low density) and low pressure (high density) with stabilizers and other additives.

GOST 16337-77. Polyethylene high pressure. Specifications.

This standard applies to high pressure polyethylene (low density), obtained by polymerization of ethylene at high pressure in tubular reactors and reactors with the mixing device with the use of the initiators of the radical type, and establishes requirements for high-pressure polyethylene, produced for the national economy and exports.

GOST 16338-85. Polyethylene low pressure. Specification.

This standard applies to low-pressure polyethylene (high density), obtained the suspension and CVD polymerization of ethylene at low pressure on complex organometallic catalysts in a slurry, and in the gas phase on complex organometallic catalysts on a carrier, and establishes requirements for polyethylene, produced for the needs of national economy and for export.

GOST 19710-83. Ethylene glycol. Specifications.

This standard applies to ethylene glycol, obtained by hydration of ethylene oxide, and establishes requirements for ethylene glycol, manufactured for the needs of the economy and exports.

GOST 22245-90. Viscous petroleum road bitumens. Specifications.

This standard applies to the viscous petroleum bitumen road, intended as a binder in the construction and repair of road and airport surfaces.

GOST 26996-86. Polypropylene and copolymers of propylene. Specifications.

This standard applies to polypropylene obtained by polymerization of propylene, and copolymers obtained by copolymerization of propylene and ethylene in the presence of organometallic catalysts in low and medium pressure.

GOST 2768-84. Acetone for industrial use. Specifications.

This standard applies to technical acetone, obtained kumolnym method, the method atcetonobuthylovogo fermentation, as well as a byproduct in several industries.

GOST 305-82. Diesel fuel. Specifications.

This standard applies to the fuel for high-speed diesel and gas turbine engines of ground and ship's equipment, obtained from the products of oil refining.

GOST 3134-78. White spirit. Specifications.

This standard applies to mineral spirits (nefras-C4-155/200), a high-boiling fractions of gasoline used in the paint industry in the production of varnish and other industries.

GOST 8313-88. Ethylcellosolve technical. Specifications.

This standard applies to technical ethilcellozolve (monoethyl ethylene glycol ether), intended for use in chemical, medical, defense and other industries.

GOST 9572-93. Petroleum benzene. Specifications.

This standard applies to petroleum benzene obtained in the catalytic reforming of gasoline fractions, catalytic hydrodealkylation toluene and xylene, as well as the pyrolysis of crude oil, and is intended as a feedstock for production of synthetic fibers and rubbers, plastics, dyes and other products of organic synthesis, and also for export.

GOST R 51105-97. Unleaded gasoline. Specifications.

This standard applies to unleaded petrol for motor transport (hereinafter - motor gasoline), used as a fuel for automobile and motorcycle engines and engines for other purposes, designed to use leaded or unleaded petrol.

GOST R 51866-2002 (EN 228-2004). Automotive fuels. Unleaded petrol. Specifications.

This standard applies to unleaded petrol (hereinafter - the gasoline) for export and the Russian market and for use as motor fuel in vehicles with gasoline engines, designed to operate on unleaded gasoline.

GOST R 52050-2006. Aviation turbine fuel. Jet A-1. Specifications.

This standard applies to fuel Jet A-1 (Jet A-1), intended for use in gas turbine engines of civil aircraft.

GOST R 52368-2005 (EN 590:2004). Diesel fuel EVRO. Specifications.

This standard applies to diesel fuel EURO designed for diesel engines.

OST 6-05-460-83. Polyethers and complex. Acceptance rules. Sampling. Packing, marking, transportation and storage.

This standard applies to both simple and complex polyesters (oligoesters) for polyurethanes and other applications. Establishes rules for receiving, sampling, packaging, labeling, transport and storage polyesters designed for the needs of the economy and for export.

TU 2211-145-05766801-2008. Polyethylene. Specifications.

These technical conditions apply to the polyethylene of high, medium and low density, obtained by gas-phase polymerization of ethylene in the presence of complex metalorganic catalysts, technology firms Spherilene "Basell", Italy.

TU 2214-126-05766801-2003. Polystyrene. Specifications.

These technical conditions apply to polystyrene, manufactured under license from FINA TECHNOLOGY. INC.

TU 2226-006-10488057-94. Laprol 5003-2-15. Specifications.

This specification applies to Laprol 5003-2-15 (polyether), obtained alcoholate polymerization of ethylene oxide and propylene glycerol with ethylene oxide content of 14-16%.

TU 2226-023-10488057-95. Laprol 5003-2-B10. Specifications.

This specification applies to Laprol 5003-2-B10 (polyether), a molecular weight of 5000±300, alcoholate obtained by polymerization of propylene oxide with glycerol and subsequent block copolymerization with ethylene oxide.

TU 2414-033-05766801-95. BRED (Bottom residues of ethylbenzene and styrene distillation). Specifications.

These technical conditions apply to the BRED (Bottom residues of ethylbenzene and styrene distillation), which are a by-product ethylbenzene styrene.

TU 2422-075-05766801-2006. Triethylene glycol technical. Specifications.

This specification applies to triethylene glycol technical, by-product of ethylene and diethylene glycol.

TU 2451-089-05766801-99. Synthetic resins (petroleum). Specifications.

These specifications apply to petroleum resin, which is a product of thermal copolymerization fraction of liquid pyrolysis products of C9 (styrene, VINYLTOLUENES, dicyclopentadiene, indena, a-methylstyrene)

TU 2452-029-05766801-94. Flotoreagent oxal. Specifications.

These technical conditions apply to flotoreagent-oxal, which is a product of high-boiling by-products (WFP) production dimetaldioxana.

TU 2483-077-05766801-98. Neonol. Specifications.

These technical conditions apply to ethoxylation monoalkilphenol based on trimers of propylene (isononyl).

TU 38.103704-90. Ether methyl tert-butyl (MTBE). Specifications.

This specification covers the ether methyl tert-butyl (MTBE), intended for use as a high-octane component of gasoline and export.