Skip to main content

Synthetic petroleum resin "Sibplast"

Is a product of thermal copolymerization of C9 fraction 120–210 °C pyrolysis of hydrocarbons at a temperature of 240–250 °C and pressures up to 1.0 MPa. Is used in paint, tire, rubber, adhesive industry and other sectors of the economy. Is the closest analog resin "Piroplast-2".

Characteristics of synthetic petroleum resin "Sibplast"

Design specification: TU 2451-089-05766801-99

ParameterValue
Softening point, °C, within80–130
Iodine value, g iodine/100 g, within20–70
Color 50% resin solution in white spirit iodine scale mg J2/100 cm3, max.400
Water, % wt., max.0.2
Ash, % wt., max.0.4
Acid number, mg KOH/g, max.1.0
Mechanical impurities content, %, max.0.3

Supply form: Flakes of irregular shape with color ranging from light-yellow to dark-brown.

Packaging: Synthetic petroleum resin "Sibplast" is shipped in wooden flood and dry tare barrels per GOST 8777-80 with a capacity of 100–200 dm3, steel drums type II, 6 performance by GOST 5044-79 with a capacity of 100–180 dm3, lock seam cardboard drums for type III GOST 17065-77 with a capacity of 100–120 dm3, the bags under GOST 2226-88 with a gross mass of 50 kg and big bags.

Transportation: Synthetic petroleum resin "Sibplast" is transported by rail and road transport in covered vehicles in accordance with the rules of transportation operating in this mode of transport.

Storage: Synthetic petroleum resin "Sibplast" is stored in covered storage areas under the canopy or tarp protecting it from direct sunlight and precipitation, away from sources of ignition.

Similar products

Acetone, commercial

Is used for synthesis of acetic anhyaride, aceton, cyanohydrine, diphenil propane and other organic products, as well as a solvent in different branches of industry.

Petroleum solution (artificial varnish)

It is a solution of petroleum resin, produced by thermal polymerization of C9 fraction (products of pyrolysis of hydrocarbons), and then dissolved in atmospheric distilled off (solvent thermopolymer). It is used for the manufacture of oil-based…

Dust suppressor

Product is obtained by bottom residues processing of glycols, glycol ethers and ethylene oxide production. It is a mixture of mono-, di-, tri-, tetra-, pentaglycols and monoethyl esters of tri- and tetraethylene glycols. It is used as a chemical…

Related products

Metal barrel 216.5 liters

Used to transport liquid products and substances that are not actively working on the steel. To prevent the active interaction of matter with the material drum, a system of internal coatings (based paints) to guarantee the permanence characteristics…

Plastic barrel 227 liters

Used for transporting a wide range of both food and corrosive substances, most of which are prohibited for packaging in metal containers without special coatings: acid, alkaline, chlorinated products and other dangerous goods, temperature not…

Intermediate bulk container (IBC) 1000 liters

Compared with steel and plastic drums, has a number of advantages in terms of ease of use, cost effectiveness and safety for the environment and humans. It is intended for repeated use, it is optimal for transportation and storage of liquid products…