Petroleum solution (artificial varnish)
It is a petroleum resin "Sibplast" resulting thermal polymerization fraction C9 120–210 °C pyrolysis products of hydrocarbons at a temperature of 240–250 °C and pressures up to 1.0 MPa, and then dissolved in atmospheric distilled off (solvent thermopolymer). Perhaps preparing a solution using a petroleum as solvent TS-1 (in accordance with GOST 10227-86 rev. 1-3) and mixtures of TS-1 and atmospheric distillation (solvent thermopolymer) in certain ratios. It is used for the manufacture of oil-based paints for interior and exterior use, dilution of color pastes, impregnation of wooden surfaces and plaster, manufacturing of building compositions.
Characteristics of petroleum solution (artificial varnish)
Design specification: TU 2451-03-51513617-2007
| Parameter | Value |
|---|---|
| Iodine scale color of 50% solution of petroleum, mg J2/100 cm3, max. | 400 |
| Relative viscosity as per flowmeter B3 or B3-246 with nozzle diameter of 4mm at 20(±2) °С, s, within | 19–55 |
| Drying time until grade 3, h, max. | 24 |
| Acid number, mg KOH/g, max. | 1.0 |
| Non-volatiles, % wt., min. | 55 |
| Density at 20(±2) °С, g/cm3, within | 0.930–1.050 |
Supply form: Fire-risk and explosive liquid.
Packaging: Petroleum solution (artificial varnish) is shipped in railway tank-cars and tank-trucks, as well as steel barrels and drums.
Transportation: Petroleum solution (artificial varnish) is shipped in railway tank-cars and tank-trucks. Transportation in open motor vehicles is allowed providing there is atmospheric impact defense.
Storage: Packaged storage in sheltered warehouses at ambient temperature ranging from -40 °C to +40 °C, on special sites away from direct sunrays and atmospheric precipitation, or under shed. Storage in reservoirs is allowed.
Similar products
Acetone, commercial
Is used for synthesis of acetic anhyaride, aceton, cyanohydrine, diphenil propane and other organic products, as well as a solvent in different branches of industry.
Synthetic petroleum resin Sibplast
Is a product of thermal copolymerization of C9 fraction. Is used in paint, tire, rubber, adhesive industry and other sectors of the economy. Is the closest analog resin "Piroplast-2"
Dust suppressor
Product is obtained by bottom residues processing of glycols, glycol ethers and ethylene oxide production. It is a mixture of mono-, di-, tri-, tetra-, pentaglycols and monoethyl esters of tri- and tetraethylene glycols. It is used as a chemical…
Related products
Metal barrel 216.5 liters
Used to transport liquid products and substances that are not actively working on the steel. To prevent the active interaction of matter with the material drum, a system of internal coatings (based paints) to guarantee the permanence characteristics…
Plastic barrel 227 liters
Used for transporting a wide range of both food and corrosive substances, most of which are prohibited for packaging in metal containers without special coatings: acid, alkaline, chlorinated products and other dangerous goods, temperature not…
Intermediate bulk container (IBC) 1000 liters
Compared with steel and plastic drums, has a number of advantages in terms of ease of use, cost effectiveness and safety for the environment and humans. It is intended for repeated use, it is optimal for transportation and storage of liquid products…