Acetone, commercial

Produced by cumene method. Used for synthesis of acetic anhyaride, aceton, cyanohydrine, diphenil propane and other organic products, as well as a solvent in different branches of industry.

Design specification: GOST 2768-84, rev. 1–2

ParameterValue
Premium gradeFirst gradeSecond grade
AppearanceClear colourless liquid
Acetone, % wt, mimimum99.7599.599.0
Density, ρ 204, g/cm30.789–0.7910.789–0.7910.789–0.792
Water, % wt, maximum0.20.50.8
Methanol, % wt, maximum0.050.05Not applicable
Acids content equivalent to acetic acid, % wt, maximum0.0010.0020.003
Oxidation resistance under potassium permanganate, h, minimum420.75

Packing, shipping, storage: Commercial acetone is filled into special purpose rail tanks with upper drain valve or multipurpose drain device. Transportation commercial acetone in railway tanks in accordance with transport regulations applicable for this mode of transport. Commercial acetone should be stored in steel, aluminium or galvanized tanks as per storage regulations for fire hazardous substances. Warranty shelf life at storage in steel, aluminium or galvanized vessels or drums - three months, in glass tare - 1 year from production date.

Buy resins, varnishes, solvents of other brands

Artificial varnish (thermopolymer)

The product is a solution of petroleum resin, produced by thermal polymerization of C9 fraction (liquid products of naphtha pyrolysis) in white-spirit or heavy petrol. It is used as a film-forming component in paints and enamels production, as well…

Petroleum solution (artificial varnish)

It is a solution of petroleum resin, produced by thermal polymerization of C9 fraction (products of pyrolysis of hydrocarbons), and then dissolved in atmospheric distilled off (solvent thermopolymer). It is used for the manufacture of oil-based…

Synthetic petroleum resin

Synthetic petroleum resin is a product of thermal copolymerization of C9 fraction liquid pyrolysis products. Grade A is used for production of varnish, construction paints and as a film-forming agent. Grade B is used as a component in adhesive…

Synthetic petroleum resin "Sibplast"

Is a product of thermal copolymerization of C9 fraction. Is used in paint, tire, rubber, adhesive industry and other sectors of the economy. Is the closest analog resin "Piroplast-2"

Petroleum toluene

The product of catalytic reforming of gasoline fractions and pyrolysis of petroleum products. Applied as a raw material for organic synthesis, high-octane component of motor fuels or solvent.

White spirit

Gasoline mixed solvent contains no more than 50% of each group of hydrocarbons, gasoline direct distillation of low-sulfur crude oils. Used in the manufacture of paints, varnishes, rubber industry.