Petroleum solution (artificial varnish)

It is a petroleum resin "Sibplast" resulting thermal polymerization fraction C9 120–210 °C pyrolysis products of hydrocarbons at a temperature of 240–250 °C and pressures up to 1.0 MPa, and then dissolved in atmospheric distilled off (solvent thermopolymer). Perhaps preparing a solution using a petroleum as solvent TS-1 (in accordance with GOST 10227-86 rev. 1-3) and mixtures of TS-1 and atmospheric distillation (solvent thermopolymer) in certain ratios. It is used for the manufacture of oil-based paints for interior and exterior use, dilution of color pastes, impregnation of wooden surfaces and plaster, manufacturing of building compositions.

Design specification: TU 2451-03-51513617-2007

ParameterValue
Iodine scale color of 50% solution of petroleum, mg J2/100 cm3, max.400
Relative viscosity as per flowmeter B3 or B3-246 with nozzle diameter of 4mm at 20(±2) °С, s19–55
Drying time until grade 3, h, max.24
Acid number, mg KOH/g, max.1.0
Non-volatiles mass content, %55
Density at 20(±2) °С, g/cm30.930–1.050

Supply form: Fire-risk and explosive liquid.

Packaging: Petroleum solution (artificial varnish) is shipped in railway tank-cars and tank-trucks, as well as steel barrels and drums.

Transportation: Petroleum solution (artificial varnish) is shipped in railway tank-cars and tank-trucks. Transportation in open motor vehicles is allowed providing there is atmospheric impact defense.

Storage: Packaged storage in sheltered warehouses at ambient temperature ranging from -40 °C to +40 °C, on special sites away from direct sunrays and atmospheric precipitation, or under shed. Storage in reservoirs is allowed.

Buy resins, varnishes, solvents of other brands

Acetone, commercial

The product is used for synthesis of acetic anhyaride, aceton, cyanohydrine, diphenil propane and other organic products, as well as a solvent in different branches of industry.

Artificial varnish (thermopolymer)

The product is a solution of petroleum resin, produced by thermal polymerization of C9 fraction (liquid products of naphtha pyrolysis) in white-spirit or heavy petrol. It is used as a film-forming component in paints and enamels production, as well…

Synthetic petroleum resin

Synthetic petroleum resin is a product of thermal copolymerization of C9 fraction liquid pyrolysis products. Grade A is used for production of varnish, construction paints and as a film-forming agent. Grade B is used as a component in adhesive…

Synthetic petroleum resin "Sibplast"

Is a product of thermal copolymerization of C9 fraction. Is used in paint, tire, rubber, adhesive industry and other sectors of the economy. Is the closest analog resin "Piroplast-2"

Petroleum toluene

The product of catalytic reforming of gasoline fractions and pyrolysis of petroleum products. Applied as a raw material for organic synthesis, high-octane component of motor fuels or solvent.

White spirit

Gasoline mixed solvent contains no more than 50% of each group of hydrocarbons, gasoline direct distillation of low-sulfur crude oils. Used in the manufacture of paints, varnishes, rubber industry.