Characteristics of polyether PP-1000
Design specification: TU 20.16.40-201-05766801-2018
|Hydroxyl number, mg KOH/g, within||150–160|
|Dynamic viscosity at 25 °C, mPa·s, within||200–300|
|Water, % wt., max.||0.045|
|Acid number, mg KOH/g, max.||0.1|
|Potassium ions (K+), mg/dm3, max||10|
Supply form: Clear, light yellow viscous liquid.
Packaging: Product is shipped in aluminum, steel or polymer drums and churns, special steel containers, railway tank-cars.
Transportation: By all means of transport.
Storage: Product should be stored in sealed storage tanks, storage areas under nitrogen pressure and sheltered warehouses at temperature not exceeding 40 °C. Product may be stored sheltered or outdoors providing there is protection against direct sunlight, atmospheric precipitation, contamination and mechanical damage. Guaranteed shelf life - 6 months from the date of production.
Is a product of propylene oxide alcoholate polymerization with glycerin. Applied in production of flexible polyurethane foam and as foam suppressant in microbiological processes (yeast production).
Is a product of alcoholate polymerization of propylene oxide and ethylene oxide with glycerine and antioxidant with special system. Product is used for production of flexible block polyurethane foams.
Is a product of propylene oxide alkaline polymerization with glycerin and further phosphate-sorbent purification. It is used for production as polyol feedstock for production of different types of polyurethane foams.
Is a product of propylene oxide alcoholate polymerization with glycerin. It is used for production of thiol polyethers employed in construction sealants compounds.
Is a product of alcoholate polymerization of propylene oxide and ethylene oxide with glycerine with ethylene oxide content 14-16%. It is used for production of polyurethane foams.
Is a product of propylene oxide alcoholate polymerization with glycerin with further block copolymerization with ethylene oxide. It is used for production of flexible polyurethane foams.
Is a product of propylene oxide alcoholate polymerization with glycerin with further block copolymerization with ethylene oxide. It is used for production of microcell shock absorbing polyurethane foams.
Is a product sequential addition to ethylene glycol first of propylene oxide and then ethylene oxide in the presence of an alkaline catalyst. It is used for production of reagents-demulsifiers for crude oil.
Is a product of alcoholate copolymerization of propylene oxide and ethylene oxide on glycerin base. It is used for production of polyurethane materials.
Is a product of ethylene oxide polymerization with ethylene glycol. Is used to manufacture plasticizers, in chemical, textile, rubber, metal-working industries. PEG is also known as polyethylene oxide (PEO) or polyoxyethylene (POE), depending on its…
Metal barrel 216.5 liters
Used to transport liquid products and substances that are not actively working on the steel. To prevent the active interaction of matter with the material drum, a system of internal coatings (based paints) to guarantee the permanence characteristics…
Plastic barrel 227 liters
Used for transporting a wide range of both food and corrosive substances, most of which are prohibited for packaging in metal containers without special coatings: acid, alkaline, chlorinated products and other dangerous goods, temperature not…
Intermediate bulk container (IBC) 1000 liters
Compared with steel and plastic drums, has a number of advantages in terms of ease of use, cost effectiveness and safety for the environment and humans. It is intended for repeated use, it is optimal for transportation and storage of liquid products…