Laprol 5003-2-15. Polyether polyol.

Is a product of propylene oxide and ethylene oxide alcoholate polymerization with glycerin. It is used for production of polyurethane foams.

LEARN PRICE AND AVAILABILITY

Characteristics of laprol 5003-2-15

Design specification: TU 2226-006-10488057-94

PropertyValue
Hydroxyl number, mg KOH/g32–36
Acid number, mg KOH/g, max.0.1
pH6.0–7.5
Water mass content, %, max.0.1
Dynamic viscosity at 25 °C, mPa.s700–950
Iodine number, I mg/100 g, max.2
Potassium ions mass concentration, mg/dm3, max.20

Supply form: Viscous liquid with color ranging from colorless to dark-yellow.

Packaging: Laprol 5003-2-15 is shipped in railway tank-cars and aluminum, steel or polymer drums and churns.

Transportation: Laprol 5003-2-15 is transported by all means of transport.

Storage: Laprol 5003-2-15 stored in sealed containers, depots under nitrogen pressure and sheltered warehouses at temperature not exceeding 40 °C. Storage under shed or at an open site is allowed providing there is protection against direct sun-rays, atmospheric precipitation, contamination and mechanical damage.

Buy laprol (polyester) of other brands

Laprol 3603-2-12

Is a product of propylene oxide and ethylene oxide alcoholate polymerization with glycerin. It is used for production of flexible block polyurethane foams.

Laprol 373

Is a product of propylene oxide alkaline polymerization with glycerin and further phosphate-sorbent purification. It is used for production as polyol feedstock for production of different types of polyurethane foams.

Laprol 4503

Is a product of propylene oxide alcoholate polymerization with glycerin. It is used for production of thiol polyethers employed in construction sealants compounds.

Laprol 5003-2-B10

Is a product of propylene oxide alcoholate polymerization with glycerin with further block copolymerization with ethylene oxide. It is used for production of flexible polyurethane foams.

Laprol 6003-2B-18

Is a product of propylene oxide alcoholate polymerization with glycerin with further block copolymerization with ethylene oxide. It is used for production of microcell shock absorbing polyurethane foams.

Polyether 4202-2B-30

Is a product sequential addition to ethylene first of propylene oxide and then ethylene oxide in the presence of an alkaline catalyst. It is used for production of reagents-demulsifiers and of polyurethane foams.

Polyether 5503-2-16

Is a product of alcoholate copolymerization of propylene oxide and ethylene oxide on glycerin base. Is intended for production of polyurethane materials.