Characteristics of laprol 373
Design specification: TU 2226-017-10488057-94
| Property | Value |
|---|---|
| Hydroxyl number, mg KOH/g | 430–480 |
| Acid number, mg KOH/g, max. | 0.2 |
| pH | 5.5–7.5 |
| Water mass content, %, max. | |
| - transportation in railway tank-cars | 0.1 |
| - transportation in drums and other small tare | 0.3 |
| Dynamic viscosity at 25 °C, mPa.s | 400–500 |
Supply form: Transparent viscous liquid.
Packaging: Laprol 373 is shipped in railway tank-cars and aluminum, steel or polymer drums and churns.
Transportation: Laprol 373 is transported by all means of transport.
Storage: Laprol 373 stored in sealed containers, depots under nitrogen pressure and sheltered warehouses at temperature not exceeding 40 °C. Storage under shed or at an open site is allowed providing there is protection against direct sun-rays, atmospheric precipitation, contamination and mechanical damage.
How to buy laprol 373
- call on the phone:
- +7 (843) 207-18-40
- +7 (717) 269-58-17 (from Kazakhstan)
- +380 (44) 392-49-96 (from Ukraine)
- write a letter on e-mail
- fill in online request
- request a call back
- Viber
- Telegram
Buy laprol (polyester) of other brands
Laprol 3603-2-12
Is a product of propylene oxide and ethylene oxide alcoholate polymerization with glycerin. It is used for production of flexible block polyurethane foams.
Laprol 4503
Is a product of propylene oxide alcoholate polymerization with glycerin. It is used for production of thiol polyethers employed in construction sealants compounds.
Laprol 5003-2-15
Is a product of propylene oxide and ethylene oxide alcoholate polymerization with glycerin. It is used for production of polyurethane foams.
Laprol 5003-2-B10
Is a product of propylene oxide alcoholate polymerization with glycerin with further block copolymerization with ethylene oxide. It is used for production of flexible polyurethane foams.
Laprol 6003-2B-18
Is a product of propylene oxide alcoholate polymerization with glycerin with further block copolymerization with ethylene oxide. It is used for production of microcell shock absorbing polyurethane foams.
Polyether 4202-2B-30
Is a product sequential addition to ethylene first of propylene oxide and then ethylene oxide in the presence of an alkaline catalyst. It is used for production of reagents-demulsifiers and of polyurethane foams.
Polyether 5503-2-16
Is a product of alcoholate copolymerization of propylene oxide and ethylene oxide on glycerin base. Is intended for production of polyurethane materials.